The two most popular crawler bulldozers passed the

2022-07-30
  • Detail

Xuangong two kinds of crawler bulldozers passed the type test of the national quality inspection center. Xuangong two kinds of crawler bulldozers passed the type test of the national quality inspection center. The test shows that the two models fully meet the national standards. The inspection center highly evaluates the performance of the products and issues the test report. In the year of quality improvement, Xuangong

in the middle of August, Xuangong T and t crawler bulldozers passed the type test of the national construction machinery quality supervision and inspection center. The test shows that the two models fully meet the national standards. The inspection center highly evaluates the performance of the products and issues the test report

during the year of quality improvement, Xuangong has made continuous improvement on the products, making great changes in power selection and performance structure of the two models. The original test report and product certification are not suitable for the comprehensive introduction of products in the current market. For this reason, the type test and verification of the product were carried out again. At the test site of the national construction machinery quality supervision and inspection center, after a period of weeks, such as the installation of the glass wool material dynamometer, the inspectors carried out a series of type tests on the bulldozer prototype, such as weight center of gravity test, traction test, noise and emission test, slope climbing test, safety inspection, etc., and calculated various technical parameters of the bulldozer. Through the inspection, the engineering and technical test experts in the test site spoke highly of the performance of Xuangong bulldozer, and put forward some technical improvement suggestions, which provided a basis for product quality upgrading. 7.5.3 the level of compressive strength and flexural strength shall be determined by the average and minimum values of the test results according to table 2

Copyright © 2011 JIN SHI